Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Engine Performance/Intake/Exhaust (
-   -   Going to get a Catch Can (

nich 07-19-2013 08:27 AM

Going to get a Catch Can
Any place recommended. Anything special I should know. Never had a hemi and from what I have read on here they seem needed. Any help is always appreciated

jeepgcoman 07-19-2013 05:53 PM

Re: Going to get a Catch Can
Definitely the first thing you should do if it's a Hemi. There are quite a few different types/brands out there, and it is really your choice, depending on what you want and how much you want to spend. Many (including me on both my Hemi vehicles) use the Billet Technology unit. They're fairly spendy (~$110 or so), but are also a superior quality to many of the others. After that, let the mods. begin!

dmsfun 07-20-2013 07:30 AM

Re: Going to get a Catch Can
X2 on the Billet Tech as Jeepcoman suggests. These are very well built and have a tight seal to them. The bracket they provide will not work on the 2006 hemi, only later models. Just get a small 90 degree angle bracket at any hardware store, drill out the holes a little larger, and mount on the passenger side engine brace bolt.

nich 07-21-2013 05:38 PM

Most of the ones I've seen don't say they are for a 2006. Are they universal? In posted a question under Billet techs header in the vendor section but haven't heard back. Maybe after the weekend. I am ready to order just need to make sure I get the right stuff.

zeprider25 07-21-2013 07:09 PM

you can also make one. tons of write ups and how to s

nich 07-21-2013 07:52 PM


Originally Posted by zeprider25 (Post 862346)
you can also make one. tons of write ups and how to s

Didn't think of that now I will look that up as I like building things. Not sure y I didn't even consider that. I guess cuz I had never even thought of one before this forum

dmsfun 07-22-2013 09:51 AM

Re: Going to get a Catch Can
As I already said, their bracket will not fit on a 2006. It costs $1 for an angle bracket, drill out the holes to larger size and mount it to the engine cross brace bolt. Simple easy solution.

All times are GMT -5. The time now is 02:19 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community