4 wheel drive problem
2006 Grand Cherokee w/ quadra drive II. Did some checking with ohm meter and indicated front axle actuator was bad. Changed out actuator and harness. The wires to the actuator just fell off as I removed the harness and were black and tarnished as if they had been broken for a while. Reassembled and filled with gear oil but service 4 wheel drive system light is still on and no shift to 4 low. Does it take several drive cycles before light goes out or something else causing problem?
|All times are GMT -5. The time now is 03:33 AM.|
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community