Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Export & Diesel Powered Jeep Models (http://www.jeepgarage.org/f79/)
-   -   2.7 crd engine drop (http://www.jeepgarage.org/f79/2-7-crd-engine-drop-65819.html)

paul4314 09-23-2013 08:18 AM

2.7 crd engine drop
 
Any body got and tips for dropping a 2.7 crd engine enough to pull 4-5 injectors out

sharkbait1 09-25-2013 09:34 PM

Re: 2.7 crd engine drop
 
I have the 2.8 and took out my injectors this afternoon. don't have to drop the engine. I had to move the entire wiring harness to get the last injector out Used penetrating oil and a piece of wood and a crow bar to slowly apply upward pressure to pop out. Maybe next time I won t have to move the harness, but this was first run at it. I'm going to do a head removal

paul4314 09-26-2013 01:59 AM

Re: 2.7 crd engine drop
 
Quote:

Originally Posted by sharkbait1 (Post 899542)
I have the 2.8 and took out my injectors this afternoon. don't have to drop the engine. I had to move the entire wiring harness to get the last injector out Used penetrating oil and a piece of wood and a crow bar to slowly apply upward pressure to pop out. Maybe next time I won t have to move the harness, but this was first run at it. I'm going to do a head removal

ok spot on it had number 5 changed couple years ago and had the hole cut in the bit wheres the wipers bit so that should be easy number 4 is the only 1 that looks like it could it a bitch if it dont move there all pretty clean so shouldnt be a problem i hope

when u go to refit dont forget to tapp the threads out the gunk that gets in there is unreal even if it lookes clean


All times are GMT -5. The time now is 05:30 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community