Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Engine Performance/Intakes and Exhausts/Superchargers/Turbos (http://www.jeepgarage.org/f170/)
-   -   2014 SRT Muffler Question (http://www.jeepgarage.org/f170/2014-srt-muffler-question-66327.html)

YFD_322 10-06-2013 02:31 PM

2014 SRT Muffler Question
 
6 Attachment(s)
Looked underneath my SRT and it looks like an easy muffler swap. Just the mufflers. Whereas the Borla atak have the extended pipes. Do they sell just the mufflers for a quick swap out?

Scottina06 10-06-2013 06:26 PM

Re: 2014 SRT Muffler Question
 
the atak swaps the pipes and mufflers from the valves back The borla mufflers are part of the tip...its an interesting setup

YFD_322 10-06-2013 07:22 PM

Re: 2014 SRT Muffler Question
 
6 Attachment(s)
But my question is...can I just get a muffler bolt on swap??? and if so which ones?

Scottina06 10-06-2013 07:55 PM

Re: 2014 SRT Muffler Question
 
some bullet mufflers would work...

YFD_322 10-07-2013 02:04 PM

Re: 2014 SRT Muffler Question
 
6 Attachment(s)
It's an axle back system Im looking for. It's 11827

Scottina06 10-07-2013 02:13 PM

Re: 2014 SRT Muffler Question
 
I believe that's the 5.7 hemi system

YFD_322 10-07-2013 05:37 PM

Re: 2014 SRT Muffler Question
 
6 Attachment(s)
It's not a true axle back system. I spoke with Borla 3 times today. Still requires a 3" cut from the welds.

http://www.borla.com/products/11827.pdf

Scottina06 10-07-2013 06:10 PM

Re: 2014 SRT Muffler Question
 
yep...that's the borla atak and s type. I havethe atak

YFD_322 10-07-2013 06:34 PM

Re: 2014 SRT Muffler Question
 
6 Attachment(s)
Just ordered! Looking at some install videos but do you recommend taking off the mufflers first, then cutting?

And I hear some tricks on getting off the black hanger by just putting screwdriver in. What do you recommend??

2014 Jeep SRT - Borla ATAK exhaust install & review - YouTube

cmk74 10-14-2013 07:50 PM

Re: 2014 SRT Muffler Question
 
I recommend going to midas and having them do it. I did that and they charged me $40 and I was out of there in less than 30 min. They have the lift, cutting tools, spray lube, and experience. Totally worth it.


All times are GMT -5. The time now is 08:21 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community