Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Grand Cherokee - WK2 - (
-   -   Front license plate (

netboy 11-01-2013 06:28 PM

Front license plate
My state law requires mounting front license plate. I hate the thought of having the front facia drilled with two monster holes for the plate at the dealership on prep time. Anyone has any ideas for drill-less mounting of the plate that is designed for the JGC?

mswlogo 11-01-2013 06:57 PM

Re: Front license plate
I believe there is 4 bolts. The bottom 2 go into a fairly cheap piece ($138) and 10 minutes to get in and out. It's unpainted. It's takes probable another 30 minutes to swap the stuff that's mounted in it :)

This is the case on a limited without the advanced tech package.

tony4311 11-01-2013 07:18 PM

Re: Front license plate
I've seen setups with magnets. You order some very strong magnets and remove the front bumper and attach/glue them to the plastic on the inside. You then put some sort of felt or fabric on the back of the plate and the magnets hold it through the bumper.

bill_de 11-01-2013 07:23 PM

Re: Front license plate
If you are going to leave the plate on you will never see the holes, and the JEEP won't feel a thing. FYI - your Jeep has lots of other holes in it that you will never see.


All times are GMT -5. The time now is 02:56 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community