wk drivers tire rubbing wheel well
Recently went off roading, at one point I banged my drivers side front end on the ground coming out of a mud hole, on the way home I had a really bad pull to the left, got home and switched out the front 2 wheels and the pull is very minimal now. But another problem I noticed after that weekend of wheeling was now my drivers side wheel sits further back in the wheel then the passenger side and on left turns the drivers wheel is rubbing pretty bad on the wheel well. Any ideas on what could have happened? Idk if an alignment would fix a wheel centering issue. I have attached a couple of pictures of the area of concern.
Apparently it is rubbing on the pitch weld. But I never had an issue before and I've been running the same setup for over a year
Re: wk drivers tire rubbing wheel well
I would get that checked out at a shop I think you have something bent if he has been running the same setup and hasn't rubbed I rub with my Duratracs and RC lift with spacers but going to do the punch weld mod soon. You may have tweaked something when you smacked it.. Another thing you could do is take it and have the alignment checked many places do it for free like Belle Tire!
|All times are GMT -5. The time now is 07:19 PM.|
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community