Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Troubleshooting/Problems Discussion (
-   -   99 Laredo cherokee, oil pressure gauge at 0- (

kokodmi 11-21-2013 12:38 PM

99 Laredo cherokee, oil pressure gauge at 0-
Help I don't know what to do, It was fluctuating at first so was told to replace sending unit, did so and now still problems and its not even fluctuating anymore it's just at 0- checked the oil after this go around to see if maybe it was empty and the oil is all up the stick can't even get a reading

Frango100 11-22-2013 05:11 PM

Re: 99 Laredo cherokee, oil pressure gauge at 0-
Happens a lot that new sending units are faulty, so i would check an other one first. You are sure that the connector is fitted?
If the engine runs, does it make a different noise then before (more mechanical noise due lifter tick for example could be an indication of real low oil pressure.
If the oil is all up the stick, then there is something not ok. You did clean the dipstick first before the measurement? You are sure its the right dipstick and not the one from the transmission?
Too high level could be caused by coolant in the oil, is there any sign of white stuff or other strange gunk on the dipstick?

All times are GMT -5. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community