Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Performance Modifications (http://www.jeepgarage.org/f6/)
-   -   Slamming a WJ to the ground (http://www.jeepgarage.org/f6/slamming-a-wj-to-the-ground-68379.html)

mtebb94 11-25-2013 02:57 AM

Slamming a WJ to the ground
 
Hey guys I have a 2000 WJ 4.7 and I am about to do the Eibach lowering springs which takes it down 1" and 1.3" in the back. That's good and all but I want to go lower. Where do I look to go? What parts do I replace to get it even lower? This is my first time lowering a car myself and I just want to make sure I do it right.

Thanks for your help!!
Mikey

JeepFreak12 11-25-2013 06:36 AM

Re: Slamming a WJ to the ground
 
You really cannot go much lower. At stock height the gap between in the bumpstop is already close, and adding the lowering kit makes it extremely close. So really the eibachs are about as low as you can go without doing MAJOR modifications.

mtebb94 11-25-2013 11:02 AM

Does it make a difference what axles I'm sitting on?

JeepFreak12 11-25-2013 11:11 AM

Re: Slamming a WJ to the ground
 
Not really. Like I said, you would have to do ALOT of work to get it really low. It would all have to be 1 off custom work too which would get very expensive.

mtebb94 11-25-2013 11:40 AM

What would this custom work entail? I'm just curious

05wkguy 11-28-2013 01:13 PM

Re: Slamming a WJ to the ground
 
TYPICALLY you need to do a 2WD conversion. Then modify the inner wheelwell to allow for more travel of the upper control arm. As it is you only have a couple inches of travel before the upper arm physically hits the sheetmetal of the inner fenderwell.

uberxj92 12-04-2013 07:34 PM

Front wheel drive cars and ifs trucks are your best bet for street mowing.

Redsoxsrt 12-05-2013 04:43 PM

Ya the lowest you can go is with the eibachs. I have a set I just took off my wj. It was pretty dam low. Handled awesome though. Did u put the springs in yet?

mtebb94 12-11-2013 11:08 AM

No but are you selling those springs? I would love to take them off your hands .


All times are GMT -5. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community