Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Suspension/Driveline/Brakes/Wheels/Tires (http://www.jeepgarage.org/f109/)
-   -   Lifting my WK2 on 2012 SRT8 20x10 wheels (http://www.jeepgarage.org/f109/lifting-my-wk2-on-2012-srt8-20x10-wheels-68578.html)

cyanidecologne 11-29-2013 06:15 PM

Lifting my WK2 on 2012 SRT8 20x10 wheels
 
Hey everyone I just got lucky with a killer deal on a set of genuine SRT8 wheels. Pretty stoked that I found them for only $750 on craigslist. There are a couple curb marks but not enough to bother me for that price and the plans of lifting it. I also just ordered my RRO lift kit for it but i am wondering what size tires I can run. Does anyone know the offset of these wheels? I plan on running Nitto Terra Grapplers however most of you run 275/55/20 which i think is going to be a bit narrow on 10" wheels. Will I be able to fit 285/55/20s or am i going to have a lot of rubbing? I am hoping the SRT8 offset will push them out enough to allow for the larger tire option.

http://i145.photobucket.com/albums/r...logne/srt8.jpg

cyanidecologne 12-01-2013 11:07 PM

Re: Lifting my WK2 on 2012 SRT8 20x10 wheels
 
Anyone?

Scottina06 12-01-2013 11:23 PM

Re: Lifting my WK2 on 2012 SRT8 20x10 wheels
 
the offset is +54 I believe. It should be stamped on the rear of each wheel.

285/55 should be ok. Check the tire calculators and see what the difference is gonna be.

cyanidecologne 12-01-2013 11:47 PM

Re: Lifting my WK2 on 2012 SRT8 20x10 wheels
 
Thank you Scott,
Well the 275/55/20 would measure 31.91" tall and 10.83" wide.
And the 285/55/20 would measure 32.34" tall and 11.22" wide.
I would love to run the 285s but I definitely dont want any rubbing. I would like to have a small poke from the tires will the 54 mm offset stick them out a bit or will I want to be running spacers as well?

Scottina06 12-02-2013 12:03 AM

Re: Lifting my WK2 on 2012 SRT8 20x10 wheels
 
You MAY be able to get away with the 285-55 since its only 11.22" wide. I tried a 305-40/22 on my SRT(12.01" wide) ad it barely touched at full lock and suspension completely compressed. The +54 does push the wheels out a little more.

RedDragon 12-02-2013 05:57 AM

Re: Lifting my WK2 on 2012 SRT8 20x10 wheels
 
I'm looking to run SRT wheels with off road tires as well. Keep us posted and remember pictures. If they stick out too far you can always get some bushwacker flares ;)

gigi_boy_156 12-02-2013 03:02 PM

Ciao,

I owned a Set of EtaBeta Jofiel wheels in the same size like your SRT wheels.

You can mount the same tire size like the SRT, that means 295/45 20 without any doubt.

By the way... the offset is 50, that one of the regular Jeep wheels is normaly 57.

Good luck and don't forget the pictures :-)

-Gigi

RedDragon 12-04-2013 02:49 PM

Re: Lifting my WK2 on 2012 SRT8 20x10 wheels
 
Quote:

Originally Posted by gigi_boy_156 (Post 939185)
Ciao,

I owned a Set of EtaBeta Jofiel wheels in the same size like your SRT wheels.

You can mount the same tire size like the SRT, that means 295/45 20 without any doubt.

By the way... the offset is 50, that one of the regular Jeep wheels is normaly 57.

Good luck and don't forget the pictures :-)

-Gigi

How far did the stick out past the fenders with the 295s?


All times are GMT -5. The time now is 06:04 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community