Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Suspension/Driveline/Brakes (http://www.jeepgarage.org/f172/)
-   -   Alignment Specifications for a 2014 SRT? (http://www.jeepgarage.org/f172/alignment-specifications-for-a-2014-srt-71267.html)

2014_SRT_Steel 02-04-2014 10:21 AM

Alignment Specifications for a 2014 SRT?
 
Hello everyone , I've been digging around in the forums with no luck "yet". Does anyone have our 2014 SRT "factory specifications" for an Alignment?

I know we have a particular "range" that they should be spec'd too, but haven't figured out what the optimal Alignment number should be nor the range for "factory settings"; this is without any suspension modifications.

I will continue my search and will follow up if I find them before anyone else...:D

Thanks!:thumbsup:

Scottina06 02-04-2014 10:33 AM

Re: Alignment Specifications for a 2014 SRT?
 
2014 is the same as 2012, 2013

A-kon 02-04-2014 02:21 PM

Re: Alignment Specifications for a 2014 SRT?
 
Well I just got finished with an alignment on my 2014 and they told me bone stock camber in the front is around -2 to -2.2. This was from their most experienced suspension tech (also Viper tech).

2014_SRT_Steel 02-04-2014 06:32 PM

Re: Alignment Specifications for a 2014 SRT?
 
Quote:

2014 is the same as 2012, 2013
What up Scott,

I "thought" the '14 Alignment spec's were slightly different from the previous '13 and below? Due to the suspension - SLA, the Bilstein adaptive suspension (ADS)... Maybe not???:confused:

Still looking for the "Specifications"; for the following values on the FRONT:

"Camber"
"Caster"
"Toe"
Would be great if we could get the "Cross Camber" & "Cross Caster" as well as the "Cross SAI" and the "Total Toe".

In the REAR:

( Camber and the Toe ) -- and the Cross Camber ~ Total Toe and Thrust Angle.

I found the spec's for the 2011-12 [WK] SRT8 4x4 , but not the - 2014 SRT, from Jeep.

Will continue my search so we can get the "ranges" , but also someone should have the "ideal" dial-in numbers as well: ( both for long-term driving wear and then obviously the more aggressive drivers numbers). :thumbsup:

Scottina06 02-04-2014 06:35 PM

Re: Alignment Specifications for a 2014 SRT?
 
nothing has changed with the suspension from 12-14' model years. Its the same ADS bilsteins etc.

2014_SRT_Steel 02-04-2014 06:42 PM

Re: Alignment Specifications for a 2014 SRT?
 
Quote:

Originally Posted by Scottina06 (Post 970574)
nothing has changed with the suspension from 12-14' model years. Its the same ADS bilsteins etc.

Great ,

Well considering that it hasn't changed; we should be able to come up with the answers to my question's now for everyone! :thumbsup:

"Specifications"; for the following values on the FRONT:

"Camber"
"Caster"
"Toe"
Would be great if we could get the "Cross Camber" & "Cross Caster" as well as the "Cross SAI" and the "Total Toe".

In the REAR:

( Camber and the Toe ) -- and the Cross Camber ~ Total Toe and Thrust Angle.


All times are GMT -5. The time now is 09:08 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community