Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Tech Tips/DIY/How To (http://www.jeepgarage.org/f175/)
-   -   How to: remove and replace any emblem (http://www.jeepgarage.org/f175/how-to-remove-and-replace-any-emblem-72700.html)

Scottina06 03-11-2014 02:34 PM

How to: remove and replace any emblem
 
First....you'll need a hair dryer, painters tape, alcohol and goo gone, flat blade screw driver.
http://img.tapatalk.com/d/14/03/12/ydy9ynyr.jpg
Next...tape of around emblem...close as you can get to exact location with painters tape.
http://img.tapatalk.com/d/14/03/12/6u4yveru.jpg
Heat up emblem with hair dryer....insert flat blade screw driver between the tape layers and emblem so not to scratch paint and pop the letters/emblem off. Clean up residue if any by rolling the tape off and then cleaning with goo gone and alcohol. Clean VERY well with alcohol if u use goo gone.
http://img.tapatalk.com/d/14/03/12/e4uvamuq.jpg
Replace emblem
http://img.tapatalk.com/d/14/03/12/7u3umy2y.jpg


Sent from my SPH-L900 using Tapatalk

akimball 03-11-2014 02:51 PM

Re: How to: remove and replace any emblem
 
i used fishing line because i was scared of the screw driver lol

Scottina06 03-11-2014 02:55 PM

Re: How to: remove and replace any emblem
 
Ive literally done it hundreds of times.,...LOL

akimball 03-11-2014 03:22 PM

Re: How to: remove and replace any emblem
 
Quote:

Originally Posted by Scottina06 (Post 989851)
Ive literally done it hundreds of times.,...LOL

i bet! im a moron tho lol i would have somehow scratched the dash taking off the rear emblem. thats how good i am. :lol::lol:

lstowell 03-11-2014 05:34 PM

Re: How to: remove and replace any emblem
 
Quote:

Originally Posted by akimball (Post 989868)
i bet! im a moron tho lol i would have somehow scratched the dash taking off the rear emblem. thats how good i am. :lol::lol:

Speaking of morons... pressure washer works with too fine a nozzle. [sigh]
Finding the emblem afterwards is an exercise for the student.

JB888 05-28-2014 12:51 AM

Re: How to: remove and replace any emblem
 
Thanks for this info. 2014 SRT owner for one week and have 30+ hrs absorbing all the info to est my Mod List -starting small with badges (CAI on order) and was relieved to see this post. thanks again for all the info on this site. I see a handful of you guys really dedicate time to this and your vehicles. Thanks again...

ENFORCER 05-28-2014 05:44 PM

Re: How to: remove and replace any emblem
 
I completely removed all my badges with some fishing line. Then rubbed the sticky residue off with a clean cloth. Then finished it off with goo gone and it looks like it was never there.
Funny how some of us like no badges, while others add them.

Mikeymike 05-28-2014 06:25 PM

Re: How to: remove and replace any emblem
 
Did mine with a credit card and blow dryer to remove dealer logo. Didn't take that long, and a bit of rubbing with a cloth and Goo-Gone and that was that . May have gotten lucky because dealer didn't have my 2010 Grand Cherokee Limited but about 2 months!!! (2010 Grand Cherokee Limited 5.7 Hemi - 50,000 miles - purchased 3-2-14 )

Gunnr 08-18-2014 11:43 PM

Re: How to: remove and replace any emblem
 
What are you using to re apply the emblem back on to the vehicle?


All times are GMT -5. The time now is 02:29 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community