Taillight Solutions rear fogs on a 2014
I have a set of these rear fogs from my 2012 in the halogen version. I read the update on how to configure these for a 2014 on thier site.
Has anyone done this? Are the yellow and white wires on the factory wiring harness or the taillight solutions harness?
Re: Taillight Solutions rear fogs on a 2014
Since the wiring has changed slightly for the 2014 year you will have to make a minor modification to the harness
See below: Taking the female connector (the one that would attach to the bulb socket)
If you are going to convert the kit you already have you will have to cut the yellow (or the middle wire of the three) from the female side of the plug. Or you could take a small flat blade screw driver and remove the red lock from the plug depress the looking tab and pull the middle wire out.
Then use a wire tap to pick up the park light signal from the white wire on the plug that feeds the LED halo.
It is not hard you will have to strip back the wire loom to gain access to the wires.
|All times are GMT -5. The time now is 08:07 AM.|
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community