Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Performance Modifications (http://www.jeepgarage.org/f6/)
-   -   intake question (http://www.jeepgarage.org/f6/intake-question-7365.html)

germen_x 03-10-2010 06:11 AM

intake question
 
i'm planning to do a custom intake for my 2004 GC (4.0 engine), first i'm going to put coupler from the throttle body to a 90 degrees aluminium pipe, then another coupler to a straight pipe, then another coupler to one ebay air filter....but i don't know what size of coupler to use from the throttle body to the 90 defrees aluminium pipe, do i will be ok with a 2.5" and then tighten that or it's too small and i will be better with a 3"? (what's the size of the throttle body?)

the one that it's in the blue circle (lmfao at my example)

http://img42.imageshack.us/img42/1324/18146830.png

germen_x 03-12-2010 02:55 AM

Re: intake question
 
hmmm 43 views and nobody helps, this is a great forum!!

Sodelcustoms 03-12-2010 06:32 AM

Re: intake question
 
Its 3" go to your local junk yard and pull the stock air tube off of a xj (cherokee) it will give you the angle you need. Then buy a 3" exhaust pipe to fit the length you need, one with a tapered end. Slap a filter on the end and you're good to go. Should'nt be more than 45-50 bucks.

germen_x 03-12-2010 07:53 PM

Re: intake question
 
Quote:

Originally Posted by Sodelcustoms (Post 168124)
Its 3" go to your local junk yard and pull the stock air tube off of a xj (cherokee) it will give you the angle you need. Then buy a 3" exhaust pipe to fit the length you need, one with a tapered end. Slap a filter on the end and you're good to go. Should'nt be more than 45-50 bucks.

thanks, man

robpp 03-12-2010 08:05 PM

Re: intake question
 
Quote:

Originally Posted by germen_x (Post 168114)
hmmm 43 views and nobody helps, this is a great forum!!


i for one wasnt going out to my jeep to measure. got to remove a few things to do it, since you could do the same thing :lol:

the 43 of us that didnt answer did not know it was 3.0 inches off the top of our heads.


would you prefer 43 'I dont know' or 'go measure it' or 'its about 2-4 inches. get a big clamp to take out the slack

im not hating just thought your response was a bit unwarranted. and the same with your comment about MY forum :rolleyes:

germen_x 03-13-2010 03:40 AM

Re: intake question
 
Quote:

Originally Posted by robpp (Post 168494)
i for one wasnt going out to my jeep to measure. got to remove a few things to do it, since you could do the same thing :lol:

the 43 of us that didnt answer did not know it was 3.0 inches off the top of our heads.


would you prefer 43 'I dont know' or 'go measure it' or 'its about 2-4 inches. get a big clamp to take out the slack

im not hating just thought your response was a bit unwarranted. and the same with your comment about MY forum :rolleyes:

:slapfight:

germen_x 03-13-2010 03:43 AM

Re: intake question
 
Quote:

Originally Posted by germen_x (Post 168719)
:slapfight:

lol just kidding....i tought that somebody already know the measurements because i was reading that almost all the people in this forum have like more than 1 year with their GC, and i just bought mine 1 week ago

i didn't want to offend nobody, it was just like a joke, but i already know the answer thanks to this forums, thanks!!


All times are GMT -5. The time now is 06:01 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community