Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Export Grand Cherokee 2011+ (http://www.jeepgarage.org/f190/)
-   -   Anyone running Proven 200 catch can down under? (http://www.jeepgarage.org/f190/anyone-running-proven-200-catch-can-down-under-74235.html)

Zybane 04-20-2014 09:23 PM

Anyone running Proven 200 catch can down under?
 
Installed the Provent and keep getting a check engine light for PCV system venting/disconnected. Not sure if its the Provent being so large or if mine has a leak. Anyone running one of these with no CEL?

Roachy 04-22-2014 05:38 AM

Re: Anyone running Proven 200 catch can down under?
 
I'm running a Provent 200 on my MY13 CRD with no problems.

Zybane 04-22-2014 06:13 PM

Re: Anyone running Proven 200 catch can down under?
 
Thanks, I may have to re-do my lines not sure why it keeps thinking the line is disconnected.

chocco 04-23-2014 03:40 AM

Re: Anyone running Proven 200 catch can down under?
 
Quote:

Originally Posted by Roachy (Post 1010759)
I'm running a Provent 200 on my MY13 CRD with no problems.

Where did you mount yours, any pics ????

I am tossing up on the air con line or behind the bumper.

Cheers

Roachy 04-23-2014 04:35 AM

Re: Anyone running Proven 200 catch can down under?
 
Quote:

Originally Posted by chocco (Post 1011234)
Where did you mount yours, any pics ????

I am tossing up on the air con line or behind the bumper.

Cheers

I have mine hanging off a bracket I made that is bolted to the front of the block. There are a couple of 'spare' threaded holes a little bit under the crankcase vent. I'll see if I can upload some pictures that I took when doing the install.

chocco 04-23-2014 04:44 AM

That would be great.

Roachy 04-23-2014 04:47 AM

Re: Anyone running Proven 200 catch can down under?
 
3 Attachment(s)
Pics of the holes, the braket I made and with it installed. More to come

Roachy 04-23-2014 04:52 AM

Re: Anyone running Proven 200 catch can down under?
 
3 Attachment(s)
Another view of bracket, provent in place and finished product - hope this helps.

chocco 04-23-2014 05:05 AM

Re: Anyone running Proven 200 catch can down under?
 
Nice work, dont suppose you made a template !!!

More than happy to compensate you for your R&D.

Roachy 04-23-2014 07:04 AM

Re: Anyone running Proven 200 catch can down under?
 
Quote:

Originally Posted by chocco (Post 1011244)
Nice work, dont suppose you made a template !!!

More than happy to compensate you for your R&D.

Had a look but can't remember where I put it. Basically I just used some cardboard to template it up (with the help from my father - benefits of having a good production engineer). Then cut it from 5 or 10mm aluminum plate that I had lying around. It did need to be bent as the pipe work didn't quite line up properly. I am probably redoing the pipe work with silicone and alloy bends as I am not quite happy with the current tubes. If so I will see about taking the bracket off and do another template for you

Zybane 04-23-2014 09:10 PM

Re: Anyone running Proven 200 catch can down under?
 
Mine is almost mounted in the same spot, but I used the airbox as the support. Gotta figure out why mine keeps tripping an engine code. Maybe my Provent is defective/has a leak or something.

chocco 04-23-2014 09:13 PM

I was thinking of that but decided against it.


All times are GMT -5. The time now is 09:51 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community