Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Engine Performance/Intake/Exhaust (
-   -   Removing throttle body (

StoneCold 04-14-2010 11:02 AM

Removing throttle body
Today I was going to begin porting and polishing my throttle body. Started to remove but I've come across a wee problem and needing some advice.

There's two wires attached to the left hand side. You'll see in the picture I've removed the main one, but this second one has me stumped.I think this is something to do with cruise control? I've pulled pushed and prodded but I don't want to break anything so I've called it a day. Any ideas as to how this comes off and also the ?vacuum? hose on the right, above the IAC and TPS. Thanks guys:thumbsup:

robpp 04-14-2010 11:43 AM

Re: Removing throttle body
1 Attachment(s)
7. Using finger pressure only, disconnect accelerator cable connector at throttle body bellcrank pin by pushing connector off bellcrank pin towards front of vehicle (4). DO NOT try to pull connector off perpendicular to bellcrank pin. Connector will be broken.
8. Lift accelerator cable from top of cable cam (6).

even thought the pic is backward you get the idea. pull that plastic part forward and it will release.

StoneCold 04-14-2010 12:24 PM

Re: Removing throttle body
:thumbsup:Great. Cheers Rob

All times are GMT -5. The time now is 08:22 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community