Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Grand Cherokee - WK (http://www.jeepgarage.org/f5/)
-   -   Knob Job... (http://www.jeepgarage.org/f5/knob-job-9153.html)

NHWK05 05-05-2010 05:13 PM

Knob Job...
 
Ha Ha bet that made a few of you question this thread.

I have the stock WK shift knob in my 05. I DO NOT like the commander/late model shifters.

I like the fit the hand feel like a comfy manual transmission shifter knob. I like the Overland style with the wood grain but it wont match the wood grain of the limited and i prefer my wood grain vs the overland style.

I like these shifters but they dont list fitting the WK any where.
http://www.custombilletstore.com/Bil...bs_p/10061.htm
I also like these.
http://www.custombilletstore.com/Bil...ob_p/10065.htm

The price is right, and i like the look/style of it but i dont know if it will fit.

I also like many of the shift knobs from the charger/300/challengers. Does anyone know if those will fit and where i can get them?

Thanks

-Kyle

robpp 05-05-2010 05:22 PM

Re: Knob Job...
 
the lx have a different diameter shaft but BT (custombilletstore) can adjust if you ask them.

actually if you use the drop down jeep srt8 is there. we are all the same.

NHWK05 05-05-2010 05:23 PM

Re: Knob Job...
 
Quote:

Originally Posted by robpp (Post 202170)
the lx have a different diameter shaft but BT (custombilletstore) can adjust if you ask them.

Ok thanks. I will give them a jingle and see what they can do. Then i need to decide what style i like better. lol I bet they are cold in the winter too.

White WK Swagga 05-05-2010 05:27 PM

Re: Knob Job...
 
ok How the Phuck do you get the shifter off. Do you pull the bottom chrome piece down and counterclockwise at the same time or twist then pull down? I can't get mine to budge....

NHWK05 05-05-2010 05:28 PM

Re: Knob Job...
 
Twist the chrome piece and pull up w/o hitting your self in the face. takes a bit of a big pull.

White WK Swagga 05-05-2010 05:29 PM

Re: Knob Job...
 
ok let me go try...

robpp 05-05-2010 05:30 PM

Re: Knob Job...
 
i do it in 2 moves nate. twist the chrome piece till it falls down some. then a good YANK up, and yes be careful of the nose..........

robpp 05-05-2010 05:33 PM

Re: Knob Job...
 
kyle, anothe roption might be paint your stocker.....i didnt sand mine first but you could....

http://i300.photobucket.com/albums/n...ed_shifter.jpg

White WK Swagga 05-05-2010 05:37 PM

Re: Knob Job...
 
F*ck!!! Do I pull the ring up towards the roof and twist clockwise or counter clockwise?

robpp 05-05-2010 05:38 PM

Re: Knob Job...
 
the chrome goes DOWN ****er

robpp 05-05-2010 05:38 PM

Re: Knob Job...
 
http://www.wkjeeps.com/interior/wk_s..._remove_01.jpg

White WK Swagga 05-05-2010 05:48 PM

Re: Knob Job...
 
Quote:

Originally Posted by robpp (Post 202194)
the chrome goes DOWN ****er

I can picture you saying that with your NY accent. LOL

But thanks Rob I'm usually good at shit like this. I should wash the chicken nugget grease from my hands first. LOL


All times are GMT -5. The time now is 04:04 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community