Jeep Garage  - Jeep Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. WK2 -Trouble Shooting/Problems/Service
    Hello All, New member here. I've search through a lot of these threads and there are quite a few that no one replies to. Those happen to be the ones that I am most interested in. I fixed my blend door issue....mostly. I cut a hole in to the side of my HVAC system, driver side, and freed the...
  2. WK2 -Trouble Shooting/Problems/Service
    Hello I recently changed the blend door accuator on the driver's side of my Jeep. It was much harder than the passengers side but I got it done and we now have cold AC! Here is the problem when I took it apart and it was time to put it all back together the plastic floor duct thing would not go...
  3. WK2 -Trouble Shooting/Problems/Service
    Hello I recently changed the blend door accuator on the driver's side of my Jeep. It was much harder than the passengers side but I got it done and we now have cold AC! Here is the problem when I took it apart and it was time to put it all back together the plastic floor duct thing would not go...
  4. WK- Grand Cherokee (2005-2010)
    My 06 Grand Cherokee has the dual zone hvac. The right side blend door doesn't change all the times. What can I do to fix?
  5. WK2 -Trouble Shooting/Problems/Service
    I am having issues re-installing my passenger side blend door gears. The bottom gear on the actuator was broken, so I have a replacement part as shown below. But it looks like the top mating gear is not in the right position. That gear can only be installed in 1 position, as shown. That top...
1-5 of 5 Results
Top