Jeep Garage  - Jeep Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Tech Tips DIY/How To
    On my J10 258ci in line 6cyl the camshaft lobe for the fuel pump is worn down so the pump doesn't pump gas. Can I weld some spacer steel on pump arm to make up the for steel worn off of the cam lobe and what kind of steel should I use?
  2. WK2 -Engine Performance/Intakes/Exhausts
    So i know on the 5.7 the hemi tick is inevitable so i’m debating when it happens if i should upgrade my cam to and aftermarket one with aftermarket lifters. Some people have told me it would be fine and other have said i’ll blow my engine. Any help would be great.
  3. JK Wrangler (model years 2007 - 2018)
    I recently took my Jeep into the shop for the dreaded tick. I plan on changing the lifters and rockers and hopefully the camshafts are good once I’m in there. If they are bad, I will replace them. I was wondering if it is possible to upgrade the camshafts in the 2012 3.6 and if it would be worth...
  4. WK- Troubleshooting/Problems
    My wife and I bought a 2011 Grand Cherokee Overland about a year ago. It has the 5.7 Hemi with around 132k miles. Every now and again she complains about a rough idle and finally the engine light came on so I pulled the codes. They told me the cam and crank sensor needed to be replaced so I...
1-4 of 4 Results