Jeep Garage  - Jeep Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
Do any of the 14 owners know if there's a way to get the navigation map full time on the cluster instead of the 8.4"?
 

·
The "REAL" JeepGarage Founder
Joined
·
1,379 Posts
No, it will only display the simple turn menu inside the 7" TFL. The 8.4" will display the nav map and radio settings simultaneously though.
 

·
Registered
Joined
·
41 Posts
Discussion Starter #3
i figured that. i was just hoping i was missing something cause the map in the cluster would have been nice.
 

·
Registered
Joined
·
1,337 Posts
I was using my nav yesterday and I didn't see anything in the 7" tft display. I have it on the digitial spedo does it need to be on another setting?
 

·
Registered
'14 Cherokke Limited
Joined
·
134 Posts
I was using my nav yesterday and I didn't see anything in the 7" tft display. I have it on the digitial spedo does it need to be on another setting?
That setting is right. But it will only come up on the digital spedo when you have an address inputted and the turn is coming up.(highway about 2 miles, street about .5-1mile away or less)
 
  • Like
Reactions: Spocker

·
Registered
Joined
·
27 Posts
I was using my nav yesterday and I didn't see anything in the 7" tft display. I have it on the digitial spedo does it need to be on another setting?
you do have to activate the feature in the settings or setup screen. go to the navigation set up and there should be an option to put the directions in the cluster. i did that. i haven't used the nav yet, so can't confim that it will work, but I am positive that it is an option that is on/off.
 
1 - 6 of 6 Posts
Top