Jeep Garage  - Jeep Forum banner
1 - 2 of 2 Posts

·
The beast from Brazil
Joined
·
8,310 Posts
When you do the key dance you will probably get the P0700 code, telling that the TCM had set a fault code. You will need to get it scanned to know what the problem was. It could have something to do with the cold, so i would just wait and see if it happens again.
 

·
The beast from Brazil
Joined
·
8,310 Posts
Could you have inadvertently knocked the gear stick to the left? This would lock it in first gear if you were stationary or moving slowly at the time. Then just a simple matter of tapping the gear stick to the right a few times to bring it up the gears until you engage full auto (D) again.



Correy
Donate Blood 13 14 95
www.donateblood.com.au
He has a WJ, the gear lever doesn´t go sideways on that one. He also got the check engine light, showing some fault was present.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top