Jeep Garage  - Jeep Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
49 Posts
the procedure for the 3.6l v6, is to loosen the cap to the oil filter cartridge, then drain the used engine oil from oil pan, this will also cause the oil filter cartridge to drain as well.
will not fully drain if oil filter cap is on tight, need to loosen it before draining oil.
once oil is drain from engine and oil drain plug is back in, simply finish removing plastic oil filter cartridge housing, and replace oil filter cartridge, very little oil will come out when pulling up oil filter from engine.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top