Jeep Garage  - Jeep Forum banner
1 - 1 of 1 Posts

·
Registered
JGC
Joined
·
27 Posts
Jumping on this old thread.

I just purchased a Pela 650 pump oil extractor for use on an ML350 and E550. It works beautifully. Not a drop of oil on the ground, and no laying on the ground either.

So, yesterday i went to use in on my 2014 GC hemi. Sadly discovered that the suction tube will not go down the dipstick tube far enough to reach the oil pan. There is an obstruction about 2" up from the length of the dipstick. Even the smallest tube that came with the unit will not make it down to the pan.

So I ended up with oily hands and a little oil on the driveway. Rather frustrating.

Has anyone been successful pumping the pan of the 5.7 Hemi?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top