Jeep Garage  - Jeep Forum banner
1 - 5 of 5 Posts

·
Registered
Grand Cherokee
Joined
·
44 Posts
Discussion Starter · #1 ·
I just picked up a used 2015 SRT. When I got home, I was trying to take off the hitch cover and found that it was stuck on with 3M double sided tape, and not with the two quarter turn fasteners.

Does anyone know a fix for this? and why this is the case? The fasteners are not big enough to fit the opening that they should lock into.

Any help is appreciated.
 

·
Administrator
2018 Jeep Trackhawk
Joined
·
56,987 Posts
I just picked up a used 2015 SRT. When I got home, I was trying to take off the hitch cover and found that it was stuck on with 3M double sided tape, and not with the two quarter turn fasteners.

Does anyone know a fix for this? and why this is the case? The fasteners are not big enough to fit the opening that they should lock into.

Any help is appreciated.
Show us a pic. Maybe the wrong ones...
 

·
Registered
Grand Cherokee
Joined
·
44 Posts
Discussion Starter · #4 · (Edited)
Here’s a pic of the push and twist pin, along with the hole on the bottom of the bumper. Can’t tell in the pic but the width of the pin is no where near big enough to catch on to the bumper. Thinking there may be a piece missing there.

Can't seem to attach the picture...

Where can I get a push and twist pin?
 
1 - 5 of 5 Posts
Top