Jeep Garage  - Jeep Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
i have a 1995 grand cherokee i have replaced both rear calipers pads and motors twice in the last 2 months and i can't figure it what is making them stick and freeze so much I've checked both rear brake hoses and both are in working order i need help
Well the only thing would be is that the bracket holding down the brake hos rusted. And made the hose collapse on itself. There is only nylon running threw the rubber hose. Just double check and make sure you have good flow going through the brick hose
 

·
Registered
Joined
·
10 Posts
He said he replaced the calipers twice. Granted the always come prelubed. Its not the best lube but it does the job. I work on cars for a living. I always add caliper lube to fresh calipers. Any part store carries it. Comes in a green jar. Says caliper lube. If u did not do it already.
 

·
Registered
Joined
·
10 Posts
New slide pins come with a set up calipers. And he would not see if the brake hose are collapsed it all internal. Never said I was mad. I was just commenting. But we really need to know what kind of flow Ur getting threw Ur brake calipers.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top