This morning driving to work in very cold weather (-30C) my '12 Overland shot a message that the Air Suspension needed servicing immediately, at the same time the intimating light on the console for height position was flashing, after a few more miles the light and message went away. After many miles throughout the morning the message returned periodically, but all this time the Jeep remained at the normal ride height.
After work I stopped for fuel and thought I would try the suspension to off road 1 but only the rear lifted and the error message returned then eventually went away. I cycled the button and eventually the screen said I was in normal ride height but that is not true because the rear is still raised.
I have since put the Jeep in my heated garage and have been letting it warm up after reading a TCB for reprogramming the air suspension if the Jeep is used in extreme cold conditions. It has been sitting a few hours inside and it is still not working, I also pulled the fuse just incase that cleared the memory.
Any ideas what it is, I have made an appointment with the dealer for next week.
After work I stopped for fuel and thought I would try the suspension to off road 1 but only the rear lifted and the error message returned then eventually went away. I cycled the button and eventually the screen said I was in normal ride height but that is not true because the rear is still raised.
I have since put the Jeep in my heated garage and have been letting it warm up after reading a TCB for reprogramming the air suspension if the Jeep is used in extreme cold conditions. It has been sitting a few hours inside and it is still not working, I also pulled the fuse just incase that cleared the memory.
Any ideas what it is, I have made an appointment with the dealer for next week.