Joined
·
157 Posts
Well i made a nice kit to help direct airflow into the radiator/ac condenser. This kit utilizes 2 angled pieces of carbon fiber for the top and bottom of the radiator. These bolt right on top/ or can use rivets. Like I used on bottom. The sides bolt right in to the existing mounting location. This makes for an easy clean install when when the front bumper and grille are off. Here are some pics. As for airflow I think this kit will offer some much relief to the cooling system. I will be adding a nice carbon fiber flat panel garnish piece for the hood latch area and where the top of the head lights are(black top support is where these panels will be contoured and affixed to.
Attachments
-
558.2 KB Views: 62
-
555.7 KB Views: 49
-
546.7 KB Views: 62