Jeep Garage  - Jeep Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
786 Posts
I took the tire off, secured vehicle with a tower/stand, removed 1 bottom clip (the big one that you turn and pull) and 1 bolt that hold the fabric cover in place (at the bottom), folded the fabric back and held open with the rotor. The bulb comes out by pressing on the two outer tabs. I have big tires, you might not need to take the tire off.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top