Jeep Garage  - Jeep Forum banner
1 - 1 of 1 Posts

·
Registered
2014 GC Limited 4X4
Joined
·
2,138 Posts
Some people have swapped in bigger tires (not on spare rim) but they have had to run a lower PSI so the lid with lay flat. Then you would need a compressor or can of air in the event you would ever need to use or possibly you might be able to use depending how low the pressure is under OEM. I don't remember what PSI they have ran them at to get the lid to lay flat.

Anyone know the width of the OEM spare rim?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top