Jeep Garage  - Jeep Forum banner

Ignition actuator replacment advice

1343 Views 4 Replies 3 Participants Last post by  DebC68
Ive been knowing it was coming and just got the part today. Quit completely today! When I go to do this repair how should I proceed. I have the security torx bit and ALMOST all the know-how. Is there a write-up on this somewhere? Could not find using search. My main concern is when I get to the ignition swtch and the cover that holds in that pin assembly. Thanks

sent via mobile using Tapatalk pro.
1 - 1 of 5 Posts
Good that you have solved your problem. But why did you think that the problem was in the ignition switch. In your case the starter relay in the PDC should have made a cli king sound when trying to start, showing already that the ignition switch is working.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.