Jeep Garage  - Jeep Forum banner
1 - 11 of 11 Posts

·
Registered
2011 Durango Heat
Joined
·
146 Posts
Discussion Starter · #1 ·
well i got back a little while ago from my meeting with the toona. first we drove around a little with the truck to do some data logging. he was checking all my readings and was very happy with what he was seeing. all my temps were low and my A/F was just were he wanted it. then it was time to hit the dyno. where i went the have an AWD mustang dyno. very nice piece of machinery. he got it all set up. on my first pull he got 485 HP 475 Ft Lbs of Torque. he was quite impressed. he didnt think it was going to hit those numbers. when he was checking out my A/F and all the other readings he was shocked that he really didnt have to change anything. he was sure he was going to have to mess with the timing and the A/F but he didnt need to. he did one more pull and hit 488 HP and 478 Ft Lbs or Torque. at that point he was like i dont want to touch anything because everything looks perfect. he was pretty amazed it hit 488 HP. he was think in the 460 range. i dont know what that equates to on a Dyno Jet. here are some pics and videos as well as the dyno sheet for the 2nd pull. enjoy. i know i am:thumbsup:

Dyno graph 488 HP 478 FT LBS TQ






 

·
Premium Member
Joined
·
58 Posts
Toona FTW!...Nice numbers and the beast is look'n bada$$!
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top