Joined
·
22 Posts
Hi all,
EDIT. Sorry Don't know why I put KJ2 in the subject. It's just a 2002 KJ. No 2.
Can someone take a look at these and verify whether the stat gasket is supposed to stick out this much before installation? The one I pulled out is keyed and also is nearly flush with the housing. I've gotten two different thermostats (Stant and OEM) and both are the same shape, but neither are keyed. I also got a Dorman housing and it is identical to the OEM housing, still keyed, even though the new stats are not.
I posted more about this over at Jeep Forums.
See images.
https://www.dropbox.com/s/fydd8k69e9t0jyf/2013-03-21 17.22.41.jpg
https://www.dropbox.com/s/o4sb0hrottahsy6/2013-03-21 17.24.41.jpg
https://www.dropbox.com/s/p39phfyzqdvloa3/2013-03-21 17.25.07.jpg
EDIT. Sorry Don't know why I put KJ2 in the subject. It's just a 2002 KJ. No 2.
Can someone take a look at these and verify whether the stat gasket is supposed to stick out this much before installation? The one I pulled out is keyed and also is nearly flush with the housing. I've gotten two different thermostats (Stant and OEM) and both are the same shape, but neither are keyed. I also got a Dorman housing and it is identical to the OEM housing, still keyed, even though the new stats are not.
I posted more about this over at Jeep Forums.
See images.
https://www.dropbox.com/s/fydd8k69e9t0jyf/2013-03-21 17.22.41.jpg
https://www.dropbox.com/s/o4sb0hrottahsy6/2013-03-21 17.24.41.jpg
https://www.dropbox.com/s/p39phfyzqdvloa3/2013-03-21 17.25.07.jpg
