Jeep Garage  - Jeep Forum banner
1 - 1 of 1 Posts

·
Registered
2010 JEEP SRT8
Joined
·
1,740 Posts
to check ball joints use a "gooseneck" or "waterpump" pliers to squish the joint. you should be able to see movement if its bad.

have you checked the control arm bolts (both upper & lower)? some have had noises from them.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top