Jeep Garage  - Jeep Forum banner
1 - 1 of 1 Posts

· Registered
05 WK Jeep Limited
Joined
·
36 Posts
Discussion Starter · #1 ·
Attempted to Plasti dip the chrome moldings and belt line as well as the grill... Needs retouched and front driver door molding needed redone completely but ran out of daylight. Any tips on how to not screw up the dip when pulling off my masking...was kinda elastic and was not tearing at the tape line and would accidentally peel the whole job off. I did 5 or 6 coats on everything and let it dry about 30 min in between coats and and hour before peeling my masking... after final coat. Anyway here's the progress so far on operation chrome delete.

View attachment 25740



View attachment 25741



View attachment 25742



View attachment 25743



View attachment 25744



View attachment 25745



View attachment 25746



View attachment 25747



View attachment 25748



View attachment 25749
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top