Jeep Garage  - Jeep Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
31 Posts
Yes. There are two hooks that hold the the main bungee string on the back side of the panel. Pry open slightly the hook on one side with a flat head screw driver while grabbing and extending the bungee string from the end that has a metal end cap. Do this to each end. Make a knot on each end so that it does not come loose.
 

· Registered
Joined
·
31 Posts
Yes. There are two hooks that hold the the main bungee string on the back side of the panel. Pry open slightly the hook on one side with a flat head screw driver while grabbing and extending the bungee string from the end that has a metal end cap. Do this to each end. Make a knot on each end so that it does not come loose.
This is possible. Take your time.
 
1 - 2 of 2 Posts
Top