Jeep Garage  - Jeep Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Hey guys, just got a new set of BFG ko2s for my wk. went up to a 265-70/17 from a 265-65/17. I have the 2.25 in rro lift and don’t have much of a rubbing problem in the front (I did do the pinch weld mod) but I was getting rubbing pretty bad in the back when on the trail today. I looked and it seemed like when the back tire was all the way into the wheel well from flexing it caught the metal of the panel on its way out which bent the panel and was cutting into my tire for the rest of the day. Made some pretty deep cuts in my brand new tires and was a problem even on the easiest parts of an easy trail anytime my back tires were articulating into my wheel well. Anyone have a solution? Please help, don’t wanna ruin these new tires, and wanna keep wheelin. Thanks
 

·
Registered
2006 Jeep Grand Cherokee WK - 5.7 HEMI, QDII + 33's on OME lift
Joined
·
43 Posts
Search my user name. I had a similar issue, solved by customizing my rear bumpstops and rolling my rear fenders.
 
1 - 2 of 2 Posts
Top