Jeep Garage  - Jeep Forum banner

Plasti dip

4K views 14 replies 6 participants last post by  Zacedward  
#1 ·
Well I dipped my stock rims what do you think
 

Attachments

#5 ·
Re: Pasti dip

yea I did in places but I took a razor blade and took the flaking places off then just put on 6 coats and it covered it up. I just played around with it till I got it right. the discoloration wont be seen if you are using the black , not sure about the other colors.
 
#7 ·
Re: Pasti dip

i really like the way it looks, it is not totally matte, i assume you used the matte cans only, but it looks semi gloss or satin. i will strongly consider doing this as i plan to paint my rusty calipers anyway so maybe i will do this while i have all the wheels off.
Either this picture was takin right after he finished spraying or he used the gloss finish for PlastiDip.

Looks like a job well done either way!
 
#9 ·
Re: Pasti dip

Nice job. I really like that look. I heard that if you use the gloss finish, it makes it harder to peel off later. Don't know if it true but that's what i heard.
They make what plastidip calls a glossifier (spelling?) that gives it a semi gloss appearance. If that's used, it peels off like normal. But if you apply a clear coat over the plastidip, it will suck to peel off.