[Imjus4u2nv]

I just installed a 20" lightbar off amazon - while custom brackets would prob be the easiest route (and also most expensive), i was able to make a bracket in about 10 minutes (super easy) - i just used some flatbar, cut it to about 3 inches and drilled two holes in opposite ends. My lightbar mounts from the top, not the sides and my bracket essentially just moves the lightbar a few inches closer to the radiator so the lightbar will clear the front grill once bumper is back on. All in was under $75 bucks (i did have some wires and relays already but they are pretty cheap). I used a relay and a switch (with on1-off-on2) so i can turn lightbar on manually, or if select on2 then will go on and off with the high beams.