Jeep Garage  - Jeep Forum banner

Firewall wire routing, any tips?

1 reading
9K views 3 replies 3 participants last post by  SRTNinja  
#1 ·
I'm installing a front cam and wanted to know how everyone else has routed wires from the engine bay to inside. Any tips would be appreciated. :D Thanks
 
#2 ·
That's easy. Just look the far left or right side of the engine bay nearest the firewall and downwards, you will see a blank rubber grommet. This leads into the interior so pull that grommet out use a long wire to fish your way into the interior. You will need to remove a kick panel down by either the drivers or passenger side feet to see your wire poking through.