i can get the pinouts but you have me confused.

are you talking about the connectors that go into the factory amp in the drivers side rear?

if yes, there is a 14 pin and a 20 pin, which one?

if not be more specific.

 

Well I am trying to get my sub amp installed I know I need to splice into the rear right and left speakers and I need to tap the remote wire I don't know which are which

 

Maybe the color of wire? That might help?

 

I can help ya.... my internet is oddly slow right now, but I'm trying to pull up the pin out diagram... post back in a few..

 

you still didnt tell me if you are tapping into the wores at the stock amp or the radio

but

here is the pinouts for the 2 connectors that go into the stock amp

if you need what goes into the rear of the radio, let me know.

 

Okay, here are the pin-outs

Use the directions that came with your LOC to match up the correct wires/

You can use any of those wires for your remote power.

 

i guess i am just wood........

 

Thanks fellas so any wire will work for remote???? Sorry it is taking me so long to respond I'm on my blackberry

Yeah, any of those wires on that connector #2.

The remote wire is just there to sense a signal - it doesn't pull a lot power (at all).

 

Thanks fellas so any wire will work for remote???? Sorry it is taking me so long to respond I'm on my blackberry

 

So, you'll be tapping into cavity #; 3,4,9,12, for your LOC. Your LOC should have four wires dangling...

Again, you can tap any of the wires on that connector for your remote power.

 

So it looks like I'm gonna be in the smaller connector????? Sorry it is taking me so long to respond I'm on my blackberry

 

The one with less cavities, less wires, YES.

 

Thanks and sorry for being a ratard (in the form of alan from hangover)

 

haha, no worries!

Just one more confirmation, you're using the connector that DOESNT have the WHITE wire on it.

 

Got use the one with the white lol

 

haha, NO!

 

We'll try her out thanks for the help!

 

No prob... let us know how it works out!

 

Where did yall get all of that info? I thought I've seen before that Rob had a skematic for taking apart stuff?

 

The pin out info... check out www.wkjeeps.com ('audio pin outs')

 

Thanks man finishing up all the audio chit tomorrow ill let ya know how she goes!

 

Ok so I am bumping but my sub cuts out everytime I put it past 20 on my radio... Anyone know y? I have a jl audio 500/1 and a kicker solo baric L5 (the old school ones that dont suck lol)

 

hmm, are your gain pots (knobs) on the LOC turned all the way up?

What are the settings on your amp (gain, bass boost, low pass filter,etc)..?

 

I got her looked at the tech went ahead and ran the remote to the ignition and tweaked everything she sounds dayum good! thanks for the help