yep, just put your seatbelt on! LOL jk



turn your key to the on position and take your seat belt, click it in and out 3 times real quick. After you do it, there should be a single ding and you turn your car off.

 

when you mean on positon, (car is running)?

 

no not running just the on position. i love this mod got rid of that really annoying chime.

 

awesome! thanks will go ahead and try it right now!

 

Did it work

 

it was one of the first things i learned on this forum it worked first time for me.

 

I'm gonna try it on the xk

 

Wow it works thanks guys

 

lol that was quick :thumbsup:

 

I just finished oil change and I was checking site and thought I'd give it ago took a 5 minute drive and no ding!

 

ok so i tried it, am i supposed to be sitting in the car when doing it?! every time i unbuckle it, it dings then after 3 times the little red fasten seatbelt sign flashes but stays on, am i supposed to turn off right away? and when i turn the key to on do i wait till everything is gone on cluster or do i do it right away?!

 

What I did Is plug the seatbelt in before you turn car to on, wait till seatbelt symbol goes off than immediately put the belt in and out 3 times ending with belt in and shut off car take it for a drive and hopefully no ding

 

None f this works for me....

 

Did you have the door shut when doing this?

 

yep, so what i did is got in my car shut the door, buckled in, turn the car to on, waited til everything in clusted turned off (seatbelt sign) then unclicked belt, back in (1) unclicked, back in (2) unclicked, back in (3) turn car off..... and still get it chiming when i drive! and i was doing this really fast, like in out in out in out, took like 5 seconds? am i doing it too fast? lol sometihng sounds so simple and i cant do it haha

 

yep, so what i did is got in my car shut the door, buckled in, turn the car to on, waited til everything in clusted turned off (seatbelt sign) then unclicked belt, back in (1) unclicked, back in (2) unclicked, back in (3) turn car off..... and still get it chiming when i drive!

Sven didn't say anything about buckling in right when you get in the car. Get in, turn to on, buckle/unbuckle 3 times and then should get a single ding..that is how I am reading it.

 

NOTE:​

​

​

​

​

The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. The manufacturer does not recommend
deactivating the Enhanced Warning System
(BeltAlert).
1. Turn the ignition switch to the OFF position, and
fasten the driver’s seat belt.
2. Start the engine, and wait for the Seat Belt Warning
Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driver’s seat belt at least three
times, ending with the seat belt buckled.
4. Turn off the engine. A single chime will sound to
signify that you have successfully completed the programming.
The Enhanced Warning System (BeltAlert) can be reactivated
by repeating this procedure.​

NOTE:​

​

​

​

​

Although the Enhanced Warning System
(BeltAlert) has been deactivated, the Seat Belt Warning
Light will continue to illuminate while the driver’s seat​

belt remains unfastened.

 

ok will go ahead and try that be right back to let y'all know! im sure it works!!

 

Svens way i geuss i cant get it to work, will try tom58

 

Thanks for advice Svenska and snofire! i tried Tom58's way and that worked with engine on!!! thanks guys! appreciate it, yall have helped me once more!

 

glad to hear you got it to work. I think the way I posted was for 05-07 only.

 

Yea, got it to work so, perfect! thanks svenka!

 

tom58's way was straight from the user manual. If you haven't read through it, you should take the time to do so. You'd be surprised how much you can learn from it. Lots of little things.